标准摘要
[中文适用范围]: 本部分 IEC 62722 规定了 LED 灯具的性能要求,以及测试方法和条件,以证明符合本标准。它适用于一般照明用途的 LED 灯具。半灯具不在本文件的范围内。对于某些类型的灯具(如装饰或家用灯具),在本文件范围内提供性能数据是不合适的。在本文件中,区分了以下类型的 LED 灯具: - A 类 - 使用 LED 模块的灯具,其符合 IEC 62717 的证明已提供。 - B 类 - 使用 LED 模块的灯具,其符合 IEC 62717 的证明未提供。 使用 LED 灯的灯具在 IEC 62722-1 中涵盖,不在本文件的范围内。本文件的要求仅涉及型式测试。本标准不涵盖 C 类灯具。本标准不涵盖有意产生彩色光的 LED 灯具,也不涵盖使用 OLED(有机 LED)的灯具。这些性能要求是对 IEC 62722-1 第 1 至 9 章要求的补充,除非本部分 2-1 中规定了替代的测量方法或限制。本文件涵盖基于无机 LED 技术产生白光的 LED 灯具。它不涵盖使用基于 OLED 技术(有机 LED 技术)光源的灯具。LED 灯具的寿命在大多数情况下比实际测试时间长得多。因此,无法以足够可靠的方式验证制造商的寿命声明。出于这个原因,制造商寿命声明的接受或拒绝:超过额定寿命的 25%(最多 6,000 小时),不在本文件的范围内。本文件选择了在定义的有限测试时间内的光通量维持类别,而不是寿命验证。因此,类别编号并不意味着对可实现寿命的预测。这些类别是光通量衰减特性类别,显示与制造商在测试开始前提供的信息一致的行为。为了验证寿命声明,需要对测试数据进行外推。目前正在考虑一种将测量数据扩展到有限测试时间之外的一般方法。本文件涵盖的 LED 灯具预期在额定电源电压的 92% 至 106% 之间以及制造商声明的环境空气温度范围内启动和正常运行。目前正在考虑对 LED 灯具的光输出比(LOR)进行评估。 [外文原描述]: IEC 62722-2-1:2023 CMV contains both the official standard and its commented version. The commented version provides you with a quick and easy way to compare all the changes between IEC 62722-2-1:2023 edition 2.0 and the previous IEC 62722-2-1:2014 edition 1.0. Furthermore, comments from IEC SC 34D experts are provided to explain the reasons of the most relevant changes, or to clarify any part of the content. IEC 62722-2-1:2023 specifies the performance requirements for LED luminaires, together with the test methods and conditions. It applies to LED luminaires for general lighting purposes. Semi-luminaires are not covered under the scope of this document. This second edition cancels and replaces the first edition published in 2014. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: alignment with IEC 62717:2014, IEC 62717:2014/AMD1:2015 and IEC 62717:2014/AMD2:2019; clarification of temperature requirements for the maintenance test, in 10.2 and Annex A; introduction of a new Annex C on methods for calculation and measurements of parameters for extension of electric and photometric data.
英文名称Luminaire performance - Part 2-1: Particular requirements - LED luminaires