电动手持式工具、便携式工具和草坪和园艺机械 安全 第 2-1 部分：手持式钻机和冲击钻机的特殊要求

[中文适用范围]： 第 1 部分的本条款适用，但以下情况除外： 补充：IEC 62841 的本部分适用于手持式钻机和冲击钻机，包括金刚石取芯钻机。本标准也适用于可通过附加螺丝刀头来驱动螺钉的钻头。本标准不适用于电锤，即使它们可以用作钻头。注 101 IEC 62841-2-6 涵盖了旋转锤。 [外文原描述]： IEC 62841-2-1:2017 applies to hand-held drills and impact drills, including diamond core drills. This standard also applies to drills that can be used for driving screws by attaching screwdriver bits.The rated voltage is not more than 250 V for single-phase a.c. or d.c. tools, and 480 V for three-phase a.c. tools. The rated input is not more than 3 700 W. The limits for the applicability of this standard for battery tools are given in K.1 and L.1. This standard deals with the hazards presented by tools which are encountered by all persons in the normal use and reasonably foreseeable misuse of the tools. Hand-held electric tools, which can be mounted on a support or working stand for use as fixed tools without any alteration of the tool itself, are within the scope of this standard and such combination of a hand-held tool and a support is considered to be a transportable tool and thus covered by the relevant Part 3. This standard does not apply to rotary hammers, even if they can be used as a drill. This Part 2-1 is to be used in conjunction with the first edition of IEC 62841-1:2014. The attention of National Committees is drawn to the fact that equipment manufacturers and testing organizations may need a transitional period following publication of a new, amended or revised IEC publication in which to make products in accordance with the new requirements and to equip themselves for conducting new or revised tests. It is the recommendation of the committee that the content of this publication be adopted for implementation nationally not earlier than 36 months from the date of publication Key words: Drill, Impact Drill, Hand-held tool, Safety