标准摘要
[中文适用范围]： IEC 62841-1:2014, 第1章适用，但规定如下： 新增内容： 本文件适用于手持式紧固件驱动工具， 用于将紧固件打入或穿过混凝土、织物、纤维板、金属、塑料、木材、木制品、纸箱和其他材料； 且其驱动紧固件的能量直接或以间接方式来自电动机或磁力驱动。 本文件不适用于压缩空气来自外部源（如压缩机或储罐）的气动驱动工具。 本文件不适用于由可燃气体驱动的工具，即使其通过电气方式点火。 注101：由压缩空气或可燃气体驱动的工具由ISO 11148-13:2017涵盖。 [外文原描述]： IEC 62841-2-16:2024+AMD1:2026 CSV is to be used in conjunction with IEC 62841-1:2014. This document supplements or modifies the corresponding clauses in IEC 62841-1, so as to convert it into the IEC Standard: Particular requirements for hand-held fastener driving tools. Where a particular subclause of IEC 62841-1 is not mentioned in this document, that subclause applies as far as reasonable. Where this document states "addition", "modification" or "replacement", the relevant text in IEC 62841-1 is to be adapted accordingly. IEC 62841-1:2014, Clause 1 is applicable, except as follows: Addition: This document applies to hand-held fastener driving tools - intended for driving fasteners into or through concrete, fabric, fiberboard, metal, plastic, wood, wood products, cartons, and other materials; and - whose energy to drive the fastener is derived directly or indirectly from an electric motor or magnetic drive. This document does not apply to pneumatically driven tools where the compressed gas comes from an external source, such as a compressor or a tank. This document does not apply to tools powered by combustible gases, even if electrically ignited. NOTE 101 Tools powered by compressed air or combustible gases are covered by ISO 11148-13:2017.
英文名称Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-16: Particular requirements for hand-held fastener driving tools