标准摘要
[中文适用范围]： IEC 62841-2-24:2026适用于往复式多功能工具。本文件应与IEC 62841-1:2014及IEC 62841-1:2014/AMD1:2025配合使用。本文件对IEC 62841-1中相应条款进行补充或修改，从而将其转化为IEC标准：手持式往复式多功能工具的特殊要求。如本文件未提及IEC 62841-1的某一条款，则该条款应在合理范围内适用。当本文件中提到“增加”、“修改”或“替代”时，应相应调整IEC 62841-1中的相关内容。请注意，国家委员会应意识到，设备制造商和测试机构可能需要在新的、修订的或修改后的IEC出版物发布后，有一段过渡期，以使产品符合新要求，并为执行新的或修订后的测试做好准备。委员会建议，在本文件发布后至少36个月内，不应早于该时间在国内实施本文件内容。 [外文原描述]： IEC 62841-2-24:2026 applies to oscillating multifunction tools. This document is to be used in conjunction with IEC 62841-1:2014 and IEC 62841-1:2014/AMD1:2025. This document supplements or modifies the corresponding clauses in IEC 62841-1, so as to convert it into the IEC Standard: Particular requirements for hand-held oscillating multifunction tools. Where a particular subclause of IEC 62841-1 is not mentioned in this document, that subclause applies as far as reasonable. Where this document states "addition", "modification" or "replacement", the relevant text in IEC 62841-1 is to be adapted accordingly. The attention of National Committees is drawn to the fact that equipment manufacturers and testing organizations may need a transitional period following publication of a new, amended or revised IEC publication in which to make products in accordance with the new requirements and to equip themselves for conducting new or revised tests. It is the recommendation of the committee that the content of this publication be adopted for implementation nationally not earlier than 36 months from the date of publication.
英文名称Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-24: Particular requirements for hand-held oscillating multifunction tools