+AMD1:2025 CSV 电动手持工具、可移动工具和园林机械设备-安全-第2部分5：手持圆盘锯的特殊要求

[中文适用范围]： IEC 62841-2-5:2014+AMD1:2025 CSV 适用于手持圆锯。本标准不适用于设计用于砂轮的锯。设计用于砂轮切割机的锯由 IEC 62841-2-22 涵盖。单相交流或直流工具的额定电压不超过 250 V，三相交流工具的额定电压不超过 480 V。额定输入不超过 3 700 W。本标准对电池工具的适用性限制在附件 K 中给出。本标准涉及工具带来的危险，所有人在正常使用和合理可预见的误用工具时都会遇到这些危险。手持式电动工具属于本标准的范围，该类工具可安装在支架或工作台上，作为固定工具使用，且无需对工具本身进行任何改动，手持式工具和支架的这种组合被视为可移动工具，因此属于相关第 3 部分的范围。请国家委员会注意，在新的、修订的或修订的 IEC 出版物发布后，设备制造商和测试组织可能需要一个过渡期，以便根据新要求生产产品并装备自己进行新的或修订的测试。委员会建议，本出版物的内容应在出版之日起 36 个月内在全国范围内实施。关键词：锯、圆形、切割、本出版物应与 IEC 62841-1:2014 结合阅读。 [外文原描述]： IEC 62841-2-5:2014+AMD1:2025 CSV applies to hand-held circular saws. This standard does not apply to saws designed for use with abrasive wheels. Saws designed for use with abrasive wheels as cut-off machines are covered by IEC 62841-2-22. The rated voltage is not more than 250 V for single-phase a.c. or d.c. tools, and 480 V for three-phase a.c. tools. The rated input is not more than 3 700 W. The limits for the applicability of this standard for battery tools is given in Annex K. This standard deals with the hazards presented by tools which are encountered by all persons in the normal use and reasonably foreseeable misuse of the tools. Hand-held electric tools, which can be mounted on a support or working stand for use as fixed tools without any alteration of the tool itself, are within the scope of this standard and such combination of a hand-held tool and a support is considered to be a transportable tool and thus covered by the relevant Part 3. The attention of National Committees is drawn to the fact that equipment manufacturers and testing organizations may need a transitional period following publication of a new, amended or revised IEC publication in which to make products in accordance with the new requirements and to equip themselves for conducting new or revised tests. It is the recommendation of the committee that the content of this publication be adopted for implementation nationally not earlier than 36 months from the date of publication. Key words: Saw, Circular, Cutting, This publication is to be read in conjunction with IEC 62841-1:2014 .