电动手持工具、可移动工具以及草坪和园林机械 安全 第2-7部分：手持喷枪的特殊要求

[中文适用范围]： IEC 62841-2-7:2024 涉及电动手持式喷枪在非易燃材料上的安全性。单相交流或直流工具的额定电压不超过 250 V，三相交流工具的额定电压不超过 480 V。额定输入不超过 3 700 W。本标准对电池工具的适用性限制在 K.1 和 L.1 中给出。本标准涉及工具在正常使用和合理可预见的误用过程中所有人遇到的危险。手持式电动工具可以安装在支架或工作台上用作固定工具，而无需对工具本身进行任何改动，属于本标准的范围，这种手持式工具和支架的组合被视为可移动工具，因此属于相关第 3 部分。本第 2-7 部分将与 IEC 62841-1:2014 第一版一起使用。国家委员会应注意，在新的、修订的或修订的 IEC 出版物发布后，设备制造商和测试机构可能需要一段过渡期，以便根据新要求生产产品并准备好进行新的或修订的测试。委员会建议，该出版物的内容应在发布之日起 36 个月内全国范围内实施。 [外文原描述]： IEC 62841-2-7:2024 deals with the safety of electric motor-operated hand-held spray guns for non-flammable materials. The rated voltage is not more than 250 V for single-phase a.c. or d.c. tools, and 480 V for three-phase a.c. tools. The rated input is not more than 3 700 W. The limits for the applicability of this standard for battery tools are given in K.1 and L.1. This standard deals with the hazards presented by tools which are encountered by all persons in the normal use and reasonably foreseeable misuse of the tools. Hand-held electric tools, which can be mounted on a support or working stand for use as fixed tools without any alteration of the tool itself, are within the scope of this standard and such combination of a hand-held tool and a support is considered to be a transportable tool and thus covered by the relevant Part 3. This Part 2-7 is to be used in conjunction with the first edition of IEC 62841-1:2014. The attention of National Committees is drawn to the fact that equipment manufacturers and testing organizations may need a transitional period following publication of a new, amended or revised IEC publication in which to make products in accordance with the new requirements and to equip themselves for conducting new or revised tests. It is the recommendation of the committee that the content of this publication be adopted for implementation nationally not earlier than 36 months from the date of publication.