手持式电动操作工具, 移动式工具以及草坪和园艺机械. 安全性. 第3-1部分: 移动式锯床的详细要求

[中文适用范围]： IEC 62841的本部分适用于带齿单刀片的可移动台锯；或 ?C 堆叠刀片，切割单个凹槽或槽；或 C 用于切割木材和类似材料、塑料和有色金属（镁除外）的模头切割机，锯片直径在 105 毫米至 315 毫米之间，下文可简称为锯或工具。本标准不适用于用于切割其他金属@如镁@钢和铁的台锯。本标准不适用于带有自动送料装置的台锯。本标准不适用于设计用于砂轮的锯。注 101 IEC 62841-3-10 涵盖了设计用于与砂轮一起用作切割机的锯。本标准不适用于具有多个主轴的台锯，例如划线刀片。注 102 在欧洲 (EN 62841-3-1)@，适用以下条件： 本标准适用于质量为： 的台锯，其质量为： ?C 对于能够由一个人用手举起的工具，最大 25 kg； ?C 对于能够由两个人用手提起的工具，最大重量为 50 公斤。本标准不适用于固定式台锯。 [外文原描述]： IEC 62841-3-1:2014 applies to transportable table saws with: - a toothed single blade; or - stacked blades that cut a single groove or slot; or - a moulding head cutter intended for cutting wood and analogous materials, plastics and nonferrous metals except magnesium with a saw blade diameter between 105 mm and 315 mm, which hereinafter may simply be referred to as saw or tool. The rated voltage is not more than 250 V for single-phase a.c. or d.c. tools, and 480 V for three-phase a.c. tools. The rated input is not more than 3 700 W. The limits for the applicability of this standard for battery tools is given in Annex K. This standard deals with the hazards presented by tools which are encountered by all persons in the normal use and reasonably foreseeable misuse of the tools. This standard does not apply to table saws intended to cut other metals, such as magnesium, steel and iron. This standard does not apply to table saws with an automatic feeding device. This standard does not apply to saws designed for use with abrasive wheels. This standard does not apply to table saws with more than one spindle such as for a scoring blade. The attention of National Committees is drawn to the fact that equipment manufacturers and testing organizations may need a transitional period following publication of a new, amended or revised IEC publication in which to make products in accordance with the new requirements and to equip themselves for conducting new or revised tests. It is the recommendation of the committee that the content of this publication be adopted for implementation nationally not earlier than 36 months from the date of publication. Key words: Table Saw, Transportable This publication is to be read in conjunction with IEC 62841-1:2014 . The contents of the corrigendum of November 2015 have been included in this copy.