+AMD1:2022 CSV 电动手持工具、可移动工具、草坪和花园机械的安全第3-10部分:可移动切断机的特殊要求

[中文适用范围]： IEC 62841 第 3-10 部分适用于旨在切割金属、混凝土和砌体等材料的便携式切管机（切割设备），并配备以下类型的磨削轮： - 41 型粘结增强轮； - 具有周边切缝的金刚石切割轮（切缝不超过 10 毫米）。 且具备以下参数： - 额定空载转速对应的轮周速度不超过 100 m/s（最大轮径）； - 轮径范围为 250 mm 至 410 mm。 本标准不适用于： - 便携式斜切锯； - 便携式瓷砖切割机； - 便携式金属锯。 [外文原描述]： IEC 62841-3-10:2015+AMD1:2022 applies to transportable cut-off machines intended to cut materials such as metals, concrete and masonry and to be fitted with one abrasive bonded reinforced wheel of Type 41, or diamond cut-off wheel with the peripheral gaps, if any, not exceeding 10 mm and with a rated no-load speed not exceeding a peripheral speed of the wheel of 100 m/s with the maximum wheel diameter and a wheel diameter range of 250 mm to 410 mm. This standard does not apply to: - transportable mitre saws; - transportable tile saws or transportable metal saws. The attention of National Committees is drawn to the fact that equipment manufacturers and testing organizations may need a transitional period following publication of a new, amended or revised IEC publication in which to make products in accordance with the new requirements and to equip themselves for conducting new or revised tests. It is the recommendation of the committee that the content of this publication be adopted for implementation nationally not earlier than 36 months from the date of publication. This publication is to be read in conjunction with IEC 62841-1:2014. The contents of the corrigendum of July 2016 have been included in this copy. Key words: Hand-held tools, Transportable tools, Cut-off machines