电动手持式工具、可移式工具以及园林和园艺机械的安全 第3-16部分：可移式带式砂光机、盘式砂光机和带/盘式砂光机的特殊要求

[中文适用范围]： IEC 62841-3-16:2025 EXV 包含国际标准及其扩展版本（EXV）。该扩展版本仅以英文形式提供，为用户提供了标准的完整内容。IEC 62841-3-16:2025 EXV 包括对 IEC 62841-1:2014 和 IEC 62841-1:2014/AMD1:2025 的引用内容。IEC 62841-3-16:2025 适用于装有以下设备的便携式带式砂光机、圆盘砂光机和带/圆盘砂光机：— 砂带；或 — 砂盘；或 — 砂带和砂盘，用于打磨固体材料。本文件不适用于手持式圆盘砂光机。注101：手持式圆盘砂光机由 IEC 62841-2-3 覆盖。本文件不适用于手持式带式砂光机。注102：手持式带式砂光机由 IEC 62841-2-4 覆盖。本第3-16部分应与 IEC 62841-1:2014 第一版和 IEC 62841-1:2014/AMD1:2025 一起使用。本第3-16部分对 IEC 62841-1:2014 中相应条款进行补充或修改，以将其转换为 IEC 标准：便携式带式砂光机、圆盘砂光机和带/圆盘砂光机的特殊要求。若 IEC 62841-1:2014 中某一具体子条款在本第3-16部分中未被提及，则该子条款在相关范围内仍适用。若本文件中提及“增加”、“修改”或“替换”，则应相应调整 IEC 62841-1:2014 中的相应内容。注：请注意，各国委员会应认识到，新发布、修订或修改后的 IEC 出版物发布后，设备制造商和测试机构可能需要一个过渡期，以便根据新要求生产产品，并为进行新测试或修订测试做好准备。委员会建议，本出版物的内容应在出版后至少36个月内采用，以实施国家层面的采纳。 [外文原描述]： IEC 62841-3-16:2025 EXV contains both the international standard and its extended version (EXV). This extended version of the official IEC Standard is available in English only and provides the user with a comprehensive content of the Standard. IEC 62841-3-16:2025 EXV includes the content of the references made to IEC 62841-1:2014 and IEC 62841-1:2014/AMD1:2025. IEC 62841-3-16:2025 applies to transportable belt sanders, disc sanders and belt/disc sanders which are equipped with – a sanding belt; or – a sanding disc; or – a sanding belt and a sanding disc for sanding solid materials. This document does not apply to hand-held disc-type sanders. NOTE 101 Hand-held disc-type sanders are covered by IEC 62841-2-3. This document does not apply to hand-held belt sanders. NOTE 102 Hand-held belt sanders are covered by IEC 62841-2-4. This Part 3-16 is to be used in conjunction with the first edition of IEC 62841-1:2014 and IEC 62841-1:2014/AMD1:2025. This Part 3-16 supplements or modifies the corresponding clauses in IEC 62841-1:2014, so as to convert it into the IEC Standard: Particular requirements for transportable belt sanders, disc sanders and belt/disc sanders. Where a particular subclause of IEC 62841-1:2014 is not mentioned in this Part 3-16, that subclause applies as far as relevant. Where this document states "addition", "modification" or "replacement", the relevant text in IEC 62841-1:2014 is to be adapted accordingly. NOTE The attention of National Committees is drawn to the fact that equipment manufacturers and testing organizations can need a transitional period following publication of a new, amended or revised IEC publication in which to make products in accordance with the new requirements and to equip themselves for conducting new or revised tests. It is the recommendation of the committee that the content of this publication be adopted for implementation nationally not earlier than 36 months from the date of publication.