标准摘要
[中文适用范围]: 本国际标准涉及电动或磁驱动的手持工具(IEC 62841-2)、便携式工具(IEC 62841-3)以及草坪和园艺机械(IEC 62841-4)的安全性。上述类别在下文中统称为“工具”或“机器”。单相交流或直流工具的额定电压不超过250V,三相交流工具的额定电压不超过480V。额定输入功率不超过3700W。电池工具的适用范围限制见K.1和L.1。本标准涉及在工具的正常使用和合理可预见的误用中,所有人员可能遇到的危险。带有电加热元件的工具也在本标准范围内。对于未与电源隔离且基本绝缘未设计用于工具额定电压的电机的要求见附录B。可充电电池驱动的电动或磁驱动工具及其电池组的要求见附录K。对于直接从电源或非隔离电源操作和/或充电的此类工具的要求见附录L。可以安装在支架或工作台上作为固定工具使用的手持电动工具也在本标准范围内,这种手持工具和支架的组合被视为便携式工具,因此适用于相关第3部分。本文件适用于最大刨削宽度为330mm的便携式刨床、压刨机以及组合刨床和压刨机,用于切割木材和类似材料。本文件不适用于非便携式的刨床、压刨机或组合刨床和压刨机。注101:ISO 19085-7:2019规定了非便携式的刨床、压刨机或组合刨床和压刨机的要求。本标准不适用于:在爆炸性环境(粉尘、蒸汽或气体)中使用的工具;用于制备和加工食品的工具;医疗用途的工具;注1:IEC 60601系列涵盖了多种医疗用途的工具。用于化妆品或药品的工具;加热工具;注2:IEC 60335-2-45涵盖了多种加热工具。电动家用和类似用途的电器;注3:IEC 60335系列涵盖了多种电动家用和类似用途的电器。工业机床的电气设备;注4:IEC 60204系列涉及机械的电气安全。用于模型制作的小型低压变压器操作台工具,例如无线电遥控模型飞机或汽车等。注5:在美国,适用以下条件:本标准涉及根据国家电气规范NFPA 70在非危险场所使用的工具。注6:在加拿大,适用以下条件:本标准涉及根据加拿大电气规范第1部分CSA C22.1和一般要求-加拿大电气规范第2部分CAN/CSA-C22.2 No. 0在非危险场所使用的工具。 [外文原描述]: IEC 62841-3-3:2024 EXV contains both the international standard and its extended version (EXV). This extended version of the official IEC Standard is available in English only and provides the user with a comprehensive content of the Standard. IEC 62841-3-3:2024 EXV includes the content of the references made to IEC 62841-1:2014. IEC 62841-3-3:2024 is to be used in conjunction with IEC 62841-1:2014 . This document supplements or modifies the corresponding clauses in IEC 62841-1, so as to convert it into the IEC Standard: Particular requirements for transportable planers and thicknessers. IEC 62841-1:2014, Clause 1 is applicable, except as follows: This document applies to transportable planers, thicknessers and combined planers and thicknessers intended for cutting wood and analogous materials with a maximum planing width of 330 mm. This document does not apply to planers, thicknessers or combined planers and thicknessers other than transportable. NOTE 101 ISO 19085-7:2019 gives requirements for planers, thicknessers or combined planers and thicknessers other than transportable.
英文名称Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-3: Particular requirements for transportable planers and thicknessers