电动手持工具 便携式工具以及草坪和园艺机械 - 安全 - 第3-4部分:可移动工作台磨床的特殊要求

[中文适用范围]： 本条款第1部分适用，除以下情况外： 补充： 本部分IEC 62841适用于可配备以下一种或两种附件的便携式台式磨床： - 根据ISO 603-4:1999的1型砂轮，直径不超过310毫米，厚度不超过55毫米； - 钢丝刷，直径不超过310毫米，厚度不超过55毫米； - 抛光轮，直径不超过310毫米； 并且任何附件的周边速度在10米/秒至50米/秒之间。 注意：抛光轮也被称为打磨轮。 [外文原描述]： IEC 62841-3-4:2016 applies to transportable bench grinders that can be equipped with one or two accessories as follows: - type 1 grinding wheels in accordance with ISO 603-4:1999 with a diameter not exceeding 310 mm and a thickness not exceeding 55 mm; - wire brushes with a diameter not exceeding 310 mm and a thickness not exceeding 55 mm; - polishing wheels with a diameter not exceeding 310 mm and with a peripheral speed of any accessory between 10 m/s and 50 m/s. The attention of National Committees is drawn to the fact that equipment manufacturers and testing organizations may need a transitional period following publication of a new, amended or revised IEC publication in which to make products in accordance with the new requirements and to equip themselves for conducting new or revised tests. It is the recommendation of the committee that the content of this publication be adopted for implementation nationally not earlier than 36 months from the date of publication Keywords: Bench Grinder, Hand-held tool, Transportable tool This publication is to be read in conjunction with IEC 62841-1:2014 . The contents of the corrigendum of December 2016 have been included in this copy.