家用和类似用途的剩余电流操作断路器.第3-3部分:外部未经处理的铝导体用螺纹型端子和铜或铝导体用铝螺纹型端子的装置的特殊要求

[中文适用范围]： This part of IEC 62873 applies to devices equipped with screw-type terminals of copper - or of alloys containing at least 58% of copper (if worked cold) or at least 50% of copper (if worked otherwise), or of other metal or suitably coated metal, no less resistant to corrosion than copper and having mechanical properties no less suitable - for use with untreated aluminium conductors, or with screw-type terminals of aluminium material for use with copper or aluminium conductors. This document does not cover the use of aluminium conductors or aluminium terminals for DC applications. Flexible aluminium conductors are not covered by this document. NOTE 1 Flexible aluminium conductors are under consideration. This document cannot be used alone but it is intended to be applied together with the applicable product standard. In this document, copper-clad and nickel-clad aluminium conductors are considered as aluminium conductors. NOTE 2 In AT, AU and DE, the use of aluminium screw-type terminals for use with copper conductors is not allowed. - In AT and DE, terminals for aluminium conductors only are not allowed; - In ES, the use of aluminium conductors is not allowed for final circuits in household and similar installations e.g. offices, shops; - In DK, the minimum cross-sectional area for aluminium conductors is 16 mm2. [外文原描述]： IEC 62873-3-3:2022 applies to devices equipped with screw-type terminals of copper - or of alloys containing at least 58 % of copper (if worked cold) or at least 50 % of copper (if worked otherwise), or of other metal or suitably coated metal, no less resistant to corrosion than copper and having mechanical properties no less suitable – for use with untreated aluminium conductors, or with screw-type terminals of aluminium material for use with copper or aluminium conductors. This second edition cancels and replaces the first edition published in 2016. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - Modification of scope to address other devices in addition to RCDs; - Modification of Clause 8 so that IEC 62873-3-3 can be referred to by other product standards in addition to those for RCDs; - Modification of 9.1 so that IEC 62873-3-3 can be referred to by other product standards in addition to those for RCDs.