标准摘要
[中文适用范围]： 本国际标准定义了在完整设备、子组件或组件制造过程中或制造完成后进行的常规测试（3.16）程序，这些设备、子组件或组件符合IEC 62368-1标准，并由交流主电源（3.7）或直流主电源（3.7）供电，用于检测制造过程中的缺陷和材料的不可接受公差。注1：本文件中定义的所有测试不一定都在最终产品制造地点进行。常规测试（3.16）的最佳执行地点应由设备制造商确定，并根据适用的合格评定方案进行审查。注2：本文件中的测试程序旨在识别生产和制造中的错误。这些测试程序不适用于产品开发或验证（参见IEC 62368-1 [1]）。 [外文原描述]： CORRECTED VERSION 2026-06 IEC 62911:2025 defines procedures for use during or after manufacturing of complete equipment, sub-assemblies or components, complying with IEC 62368-1 and powered by an AC or DC, to detect manufacturing failures and unacceptable tolerances in manufacturing and materials. NOTE 1: Not all the tests defined in this document are necessarily performed at the end product manufacturing location. The optimal location for the can be defined by the equipment manufacturer and reviewed under the applicable conformity assessment scheme. NOTE 2: The test procedures in this document are intended to identify production and manufacturing errors. These test procedures are not intended for product development or verification (see The test procedures in this document are intended to identify production and manufacturing errors. These test procedures are not intended for product development or verification (see IEC 62368-1). The content of the corrigendum 1 (2026-06) has been included in this copy.
英文名称Audio, video and information technology equipment - Routine electrical safety testing in production