标准摘要
[中文适用范围]： IEC 63044-5-1:2017 第 1 条适用，并进行以下修改： 将第四段替换为以下一段： 本文件规定了安装在住宅、商业和轻工业环境中的 HBES/BACS 的 EMC 要求，根据符合 IEC 61000-6-1 中给出的定义。 [外文原描述]： IEC 63044-5-2:2017 is a product family standard that sets the minimum level of EMC performance for the HBES/BACS network in addition to the product EMC standards for HBES/BACS devices. It also applies to devices used within an HBES/BACS network for which no specific HBES/BACS product EMC standard exists. In addition, it defines EMC requirements for the interface of equipment intended to be connected to an HBES/BACS network. It does not apply to interfaces to other networks. NOTE An example of other networks is a dedicated ICT network covered by CISPR 22 and 23. This document specifies EMC requirements for HBES/BACS to be installed in residential, commercial and light-industrial environments, according to the definition given in IEC 61000-6-1. This document is applicable (but not limited) to operator stations and other human–system interface devices, devices for management functions, control devices, automation stations and application-specific controllers, field devices and their interfaces, cabling and interconnection of devices, used within a dedicated HBES/BACS network. This publication is to be read in conjunction with IEC 63044-5-1:2017.
英文名称Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 5-2: EMC requirements for HBES/BACS used in residential, commercial and light-industrial environments