标准摘要
[中文适用范围]： IEC 63044-5-1:2017 第 1 条适用@并进行以下修改 将第四段替换为以下内容 本文件规定了根据 IEC 61000-6 中给出的定义安装在工业环境中的 HBES/BACS 的 EMC 要求-2 注工业环境涵盖工业场所中可能存在的办公空间工业自动化系统不在范围之内 [外文原描述]： IEC 63044-5-3:2017 is a product family standard that sets the minimum level of EMC performance for the HBES/BACS network in addition to the product EMC standards for HBES/BACS devices. It also applies to devices used within an HBES/BACS network for which no specific HBES/BACS product EMC standard exists. In addition, it defines EMC requirements for the interface of equipment intended to be connected to an HBES/BACS network. It does not apply to interfaces to other networks. NOTE An example of other networks is a dedicated ICT network covered by CISPR 22 and 23. This document specifies EMC requirements for HBES/BACS to be installed in industrial environments, according to the definition given in IEC 61000-6-2. NOTE Industrial environment covers the office spaces that may be present in industrial premises. Industrial automation systems are outside the scope. This document is applicable (but not limited) to operator stations and other human–system interface devices, devices for management functions, control devices, automation stations and application-specific controllers, field devices and their interfaces, cabling and interconnection of devices, used within a dedicated HBES/BACS network. This publication is to be read in conjunction with IEC 63044-5-1:2017.
英文名称Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 5-3: EMC requirements for HBES/BACS used in industrial environments