标准摘要
[中文适用范围]： 本文件规定了用于电能存储系统的二次锂离子电池和电池的产品安全要求及测试方法（图 2），其最大直流电压（标称值）为 1 500 V。本文件包含用于工业应用的二次锂离子电池和电池的基本安全要求（IEC 62619）。本文件为电能存储系统提供了额外的或特定的要求。由于本文件涵盖了各种电能存储系统的电池，它包含了电能存储系统通用和最低的要求。属于本文件范围的装置示例包括：电信、中央应急照明和报警系统、 stationary 发动机启动、光伏系统、家庭（住宅）储能系统 (HESS) 以及大型储能（并网/离网）。本文件适用于不间断电源 (UPS) 的电池和电池组。本文件不适用于 500 Wh 或以下的便携系统，此类系统由 IEC 61960-3 涵盖。 [外文原描述]： IEC 63056:2020 specifies requirements and tests for the product safety of secondary lithium cells and batteries used in electrical energy storage systems (Figure 2) with a maximum DC voltage of 1 500 V (nominal). Basic safety requirements for the secondary lithium cells and batteries used in industrial applications are included in IEC 62619. This document provides additional or specific requirements for electrical energy storage systems. Since this document covers batteries for various electrical energy storage systems, it includes those requirements which are common and minimum to the electrical energy storage systems. Examples of appliances that are within the scope of this document are: • telecommunications, • central emergency lighting and alarm systems, • stationary engine starting, • photovoltaic systems, • home (residential) energy storage systems (HESS), and • large energy storage: on-grid/off-grid. This document applies to cells and batteries for uninterruptible power supplies (UPS). This document does not apply to portable systems 500 Wh or below, which are covered by IEC 61960-3. The contents of the corrigendum of June 2021 have been included in this copy.
英文名称Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for secondary lithium cells and batteries for use in electrical energy storage systems