电动工具 粉尘测量程序 第3-9部分：便携式斜切锯的特殊要求

[中文适用范围]： IEC 63241-3-9:2025适用于用于切割木材或木基材料的便携式万能锯。本文件应与IEC 63241-1:2023第一版配合使用。本文件对IEC 63241-1中相应条款进行补充或修改，以便将其转化为IEC标准：便携式万能锯的特殊要求。若IEC 63241-1中的某个子条款在本文件中未被提及，该子条款应在合理范围内适用。若本文件提到“补充”“修改”或“替换”，则应相应调整IEC 63241-1中的相关内容。以下为文本格式的使用方式：- 要求：使用罗马体；- 测试规范：使用斜体；- 注释：使用小罗马体。第三章中定义的术语使用粗体字。与IEC 63241-1相比，本文件新增的子条款、注释、表格和图示将从101开始编号。注：请注意，国家委员会应意识到，新发布、修订或修改后的IEC标准发布后，设备制造商和检测机构可能需要一定过渡期，以使其产品符合新的要求，并为其开展新的或修订的测试做好准备。委员会建议，本文件的内容应在出版之日起至少36个月后才在国内实施。 [外文原描述]： IEC 63241-3-9: 2025 applies to transportable mitre saws intended to cut wood or wood-based materials. This document is to be used in conjunction with the first edition of IEC 63241-1:2023. This document supplements or modifies the corresponding clauses in IEC 63241-1, so as to convert it into the IEC Standard: Particular requirements for transportable mitre saws. Where a particular subclause of IEC 63241-1 is not mentioned in this document, that subclause applies as far as reasonable. Where this document states "addition", "modification" or "replacement", the relevant text in IEC 63241-1 is to be adapted accordingly. The following print types are used: - requirements: in roman type; - test specifications: in italic type; - notes: in small roman type. The terms defined in Clause 3 are printed in bold typeface. Subclauses, notes, tables and figures which are additional to those in IEC 63241-1 are numbered starting from 101. NOTE The attention of National Committees is drawn to the fact that equipment manufacturers and testing organizations can need a transitional period following publication of a new, amended or revised IEC publication in which to make products in accordance with the new requirements and to equip themselves for conducting new or revised tests. It is the recommendation of the committee that the content of this publication be adopted for implementation nationally not earlier than 36 months from the date of publication.