电力设施自动化用通信网络和系统第10-3部分:IEC 61850系统的功能试验

[中文适用范围]： IEC 61850 第 10 部分的技术报告，适用于变电站内应用程序的测试。旨在为执行 IEC 61850-4:2011 中定义的质量保证阶段提供实用指南。然而，该文档侧重于最终用户需求的满足，而该文档中的质量保证始于 IED 制造商的开发阶段并侧重于系统集成商的角色。本报告可能有助于将 IEC 61850 应用于其他领域的用户，但变电站领域之外的 IEC 61850 系统测试不在本文件范围内。本文件描述：对变电站解决方案进行验证和确认的方法；第 2.1 版中使用 IEC 61850 资源进行测试的方法；针对不同用例的推荐测试实践；使用通信（如 GOOSE 和 SV）而非硬接线系统接口（如硬接线接口）对基于 IEC 61850 的设备和系统进行测试的过程定义；与保护和控制功能验证和测试相关的用例。本文件不涵盖 IEC 61850-10 中设备的符合性测试，也不涵盖独立于设备的功能测试方法。 [外文原描述]： IEC TR 61850-10-3:2022(E), which is a technical report, is applicable to testing of applications within substations. It is intended to give practical guidelines to perform the stages of quality assurance defined in IEC 61850-4:2011. However, while the quality assurance in that document begins with the IED manufacturer development stage and focuses on the role of the system integrator this document focuses on end-user requirement fulfilment. The report may be useful to users applying IEC 61850 to other domains, however testing of IEC 61850 systems outside the substation domain is not within the scope of this document. This document describes: • A methodical approach to the verification and validation of a substation solution • The use of IEC 61850 resources for testing in Edition 2.1 • Recommended testing practices for different use cases • Definition of the process for testing of IEC 61850 based devices and systems using communications instead of hard wired system interfaces (ex. GOOSE and SV instead of hardwired interfaces) • Use cases related to protection and control functions verification and testing This document does not cover the conformance testing of devices according to IEC 61850-10 or methodologies for testing of abstract device independent functions.