标准摘要
[中文适用范围]： 本标准适用于额定工作电压不超过1500 V直流和额定电流不超过500 A的附件和电缆组件，这些附件和电缆组件具有与IEC 62196-3:2014中指定的相同配置，并采用热传感或热传输及热传感技术。这些附件和电缆组件旨在用于IEC 61851-23中规定的电路的直流充电系统。本文件所涵盖的附件旨在用于IEC 61851-1中的充电模式4。这些附件旨在连接到符合IEC 62893系列的直流电缆。 [外文原描述]： IEC TS 62196-3-1:2020(E) applies to accessories and cable assemblies with the same configuration as specified in IEC 62196-3:2014 with rated operating voltage not exceeding 1 500 V DC and a rated current not exceeding 500 A that employ - thermal sensing, or - thermal transport and thermal sensing with the system architecture described in 4.101. These accessories and cable assemblies are intended to be used in conductive charging systems for circuits specified in IEC 61851-23. NOTE Edition 2 of IEC 61851-23 is under development. The accessories covered by this document are intended to be used in charging mode 4 according to IEC 61851-1. These accessories are intended to be connected to cables according to the IEC 62893 series for DC cables.
英文名称Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 3-1: Vehicle connector, vehicle inlet and cable assembly for DC charging intended to be used with a thermal management system