高温下运行的光伏组件、组件和材料的鉴定指南

[中文适用范围]： 本文件定义了用于部署在导致高于IEC 61215-1、IEC 61730-1及相关组件标准（IEC 62790和IEC 62852）范围内的更高组件温度的条件下的组件的额外测试要求。IEC 61215-2和IEC 61730-2（及相关组件标准）规定的测试条件假设这些标准适用于组件部署，其第98百分位温度（T98th，即一年中预期等于或超过175.2小时的温度）低于70 °C。本文件定义了两个温度等级：温度等级1和温度等级2，其设计考虑了部署环境，其中温度等级1的T98th小于或等于80 °C，温度等级2的T98th小于或等于90 °C。本文件提供了IEC 61215系列、IEC 61730系列、IEC 62790和IEC 62852中用于温度等级1和2组件运行的推荐额外测试条件。 [外文原描述]： IEC TS 63126:2020 defines additional testing requirements for modules deployed under conditions leading to higher module temperature which are beyond the scope of IEC 61215-1 and IEC 61730-1 and the relevant component standards, IEC 62790 and IEC 62852. The testing conditions specified in IEC 61215-2 and IEC 61730-2 (and the relevant component standards IEC 62790 and IEC 62852) assumed that these standards are applicable for module deployment where the 98th percentile temperature (T98th), that is the temperature that a module would be expected to equal or exceed for 175,2 h per year, is less than 70 °C. This document defines two temperature regimes, temperature level 1 and temperature level 2, which were designed considering deployment in environments with mounting configurations such that the T98th is less than or equal to 80 °C for temperature level 1, and less than or equal to 90 °C for temperature level 2. The contents of the corrigendum 1 (2022-09) have been included in this copy.