聚光光伏组件防火测试

[中文适用范围]： IEC TS 63392:2025 规定了用于评估集中式系统中模块基本防火性能的测试方法，这些系统的最大直流电压不超过1 500 V。由于集中器模块可能会因飞溅的火星而暴露于火焰中，或者由于热点或电弧（内部火灾）而引发火灾，因此本文件中概述的测试将在这两种模式下进行。适用的防火测试可能由当地法规要求，但不在本文件的范围内。安装在建筑物内或上的CPV系统或CPV模块应满足国家建筑和施工法规、条例及要求，但不在本技术规范的范围内。如果国家或地方法规定义了防火测试要求，则应予以遵循。如果没有这样的要求，以下国际和国家标准可以提供有关测试的信息，可供使用：ISO 5657，ENV 1187-1至-4，ANSI/UL 790，EN 13501-1。 [外文原描述]： IEC TS 63392:2025 specifies a test method for evaluating the basic fire behaviour of modules used in concentrating systems with a maximum DC system voltage of 1 500 V or less. Since the concentrator module may be exposed to flames due to flying embers or fire may be caused by the module itself due to hot spots or arching (internal fire), the tests outlined in this document are conducted in these two modes. Applicable fire testing may be required by local codes but are not covered in this document. CPV system or CPV modules mounted in or on buildings, shall fulfil national building and construction codes, regulations, and requirements and are not covered by this Technical Specification. If national or local codes define fire test requirements, they should be followed. If such requirements are not available, the following international and national standards give information for tests, which could be used: ISO 5657, ENV 1187-1 to -4, ANSI/UL 790, EN 13501-1.