标准摘要
[中文适用范围]: 本标准规定了低污染水(如饮用水、原水或游泳池水)中溶解阴离子氯酸根、氯化物和亚氯酸根的测定方法。 适当和合适的组件以及取决于它们的程序步骤的多样性仅允许进行一般性描述。 有关分析技术的更多信息,请参阅参考书目。 对样品进行适当的预处理(例如稀释)并使用电导检测器 (CD)、紫外检测器 (UV) 或安培检测器 (AD) 使得表 1 中给出的工作范围可行。 表 1 — 分析方法的工作范围 阴离子 工作范围 mg/la 检测 氯酸盐 0,03 至 10 CD 氯化物 0,1 至 50 CD Chloriteb 0,05 至 1 CD 0,1 至 1 UV; λ = 207 nm 至 220 nm 0.01 至 1 AD; 0.4 V 至 1.0 V a 工作范围受色谱柱离子交换容量的限制。 如有必要,可以通过稀释将样品调整至此范围。 b 亚氯酸盐的最小工作范围为 0.05 mg/l,是通过校准检查获得的,但实验室间试验(见表 A.4)表明,很难以足够的精度获得这一范围,而且只有非常小心才能获得。 [外文原描述]: This document specifies a method for the determination of the dissolved anions chlorate, chloride and chlorite in water with low contamination (e.g. drinking water, raw water or swimming pool water). The diversity of the appropriate and suitable assemblies and the procedural steps depending on them permit a general description only. For further information on the analytical technique, see Bibliography.
英文名称Water quality — Determination of dissolved anions by liquid chromatography of ions — Part 4: Determination of chlorate, chloride and chlorite in water with low contamination