个体防跌落系统 第1部分:整体吊带

[中文适用范围]： ISO 10333的本部分规定了全身式安全带（FBH）的要求、测试方法、一般使用说明、标记、包装和维护。 FBH 的主要目的是允许用户连接到个人防坠落系统 (PFAS)，该系统将在未来的国际标准中指定（请参阅参考文献中的 ISO 10333-6），这样，如果需要进行逮捕，处，制动力不超过 6 kN。 就 ISO 10333 本部分而言，FBH 可能具有允许用户连接到其他类型的安全或访问系统的连接元件，例如工作定位系统、受控下降/上升系统或密闭空间访问系统系统。 ISO 10333 的这一部分包括对此类附件元件的要求。 ISO 10333的本部分仅适用于总质量不超过100 kg的仅限单人使用的FBH。 注：建议总质量（包括工具和设备）超过 100 kg 的防坠落设备的用户向设备制造商寻求有关设备适用性的建议，这可能需要额外的测试。 ISO 10333 本部分的范围不延伸至： a) 腰带或胸带：此类设备在个人防坠落系统 (PFAS) 中使用不被认为是安全的； b) 并非主要设计用于 PFAS 的所有其他类型的安全带； c) FBH 的其他特殊要求，特别是在受控下降/上升系统或密闭空间进入系统中使用； d) 对受控下降/上升系统或密闭空间进入系统中 FBH 性能的兼容性或适用性进行任何评估。 ISO 10333 的这一部分没有规定当安全带受到特殊使用条件（例如，在进入工作场所和/或特定环境因素方面存在异常限制）时适用的附加要求。 因此，ISO 10333 的本部分没有规定确保结构材料耐用性的处理（例如热处理、防腐处理、物理和化学危害防护），但应符合相应的国际标准，否则应符合相应的国际标准。 ，符合涉及相关物理特性和/或用户安全的国家标准和其他规范。 特别是当认为有必要测试设备金属部件的耐腐蚀性时，应参考ISO 9227。 [外文原描述]： This part of ISO 10333 specifies the requirements, test methods, instructions for general use, marking, packaging and maintenance for full-body harnesses (FBH). The main purpose of a FBH is to allow the user to connect into a personal fall-arrest system (PFAS), which will be specified in a future International Standard (see ISO 10333-6 in the Bibliography), such that if an arrest takes place, the arresting force will not exceed 6 kN. For the purposes of this part of ISO 10333, FBH may have attachment elements that allow the user to connect into other types of safety or access system, for example a work-positioning system, a controlled descent/ascent system or a confined-space access system. This part of ISO 10333 includes requirements for such attachment elements. This part of ISO 10333 is applicable only to FBH limited to single-person use of a total mass not exceeding 100 kg. NOTE Users of fall-protection equipment whose total mass (including tools and equipment) exceeds 100 kg are advised to seek advice from the equipment manufacturer regarding the suitability of the equipment, which may need additional testing. The scope of this part of ISO 10333 does not extend to: a) waist belts or chest harnesses: such equipment is not considered as safe to use in personal fall-arrest systems (PFAS); b) all other types of harnesses that are not designed primarily for use in PFAS; c) other special requirements for FBH, peculiar to use in a controlled descent/ascent system or a confined-space access system; d) any assessment of compatibility or suitability in respect of the performance of FBH in a controlled descent/ascent system or a confined-space access system. This part of ISO 10333 does not specify those additional requirements that would apply when harnesses are subjected to special conditions of use (where, for example, there exist unusual limitations concerning access to the place of work and/or particular environmental factors). Thus treatments to ensure the durability of the materials of construction (such as heat treatment, anti-corrosion treatment, protection against physical and chemical hazards) are not specified in this part of ISO 10333, but should comply with appropriate International Standards or, failing that, with national standards and other specifications dealing with relevant physical characteristics and/or the safety of users. In particular, when it is considered necessary to test the corrosion resistance of metallic parts of the equipment, reference should be made to ISO 9227.