几何产品技术规格 (GPS). 坐标测量系统 (CMS) 的验收试验和复检试验. 第10部分: 激光跟踪仪

[中文适用范围]： 本文件规定了通过测量校准的测试长度来验证激光跟踪器性能的验收测试，这些测试符合制造商的规范。它还规定了重新验证测试，使用户能够定期重新验证激光跟踪器的性能。本文件中给出的验收和重新验证测试适用于使用反射器或反射器与触针或光学距离传感器组合作为探测系统的激光跟踪器。使用干涉测量 (IFM)、绝对距离测量 (ADM) 或两者的激光跟踪器可以使用本文件进行验证。本文件还可用于规定和验证使用协作目标的其他球面坐标测量系统（例如“激光雷达”系统）的相关性能测试。注意：不跟踪目标的系统（例如激光雷达系统）不会进行探测性能测试。本文件不明确适用于不使用球面坐标系的测量系统。但是，相关方可以通过相互协商将本文件应用于此类系统。本文件规定了： — 激光跟踪仪制造商或用户可以指定的性能要求； — 执行验收和重新验证测试的方式，以证明规定的要求； — 证明符合性的规则； — 可使用验收和重新验证测试的应用。 [外文原描述]： This document specifies the acceptance tests for verifying the performance of a laser tracker by measuring calibrated test lengths, according to the specifications of the manufacturer. It also specifies the reverification tests that enable the user to periodically reverify the performance of the laser tracker. The acceptance and reverification tests given in this document are applicable to laser trackers utilizing a retroreflector, or a retroreflector in combination with a stylus or optical distance sensor, as a probing system. Laser trackers that use interferometric measurement (IFM), absolute distance measurement (ADM) or both can be verified using this document. This document can also be used to specify and verify the relevant performance tests of other spherical coordinate measurement systems that use cooperative targets, such as “laser radar” systems. NOTE Systems which do not track the target, such as laser radar systems, will not be tested for probing performance. This document does not explicitly apply to measuring systems that do not use a spherical coordinate system. However, interested parties can apply this document to such systems by mutual agreement. This document specifies: — performance requirements that can be assigned by the manufacturer or the user of the laser tracker; — the manner of execution of the acceptance and reverification tests to demonstrate the stated requirements; — rules for proving comformity; — applications for which the acceptance and reverification tests can be used.