辅助产品.人员转移用起重机.要求和试验方法

[中文适用范围]： 本文件规定了用于转移残疾人的提升机和身体支撑装置的要求和测试方法。 该文件适用于分类为以下产品： 123603 用于转移坐姿、带有吊带座椅的人员的移动式起重机； ——123604 用于转移站立位置人员的移动葫芦； ——123606 移动式升降机，用于转移坐姿固定座椅的人员； ——123609 用于转移躺着的人的移动葫芦； ——123612 固定在墙壁、地板或天花板上的固定式起重机； ——123615 固定在另一个产品上或安装在另一个产品上的固定式起重机； ——123618 固定式独立式起重机； ——123621 用于起重机的身体支撑装置。 本文件涵盖不同类型的移动式和固定式起重机。 一些要求和测试方法是通用的，而另一些则仅对特定产品类型有效。 附件 A、B 和 C 提供一般建议。 本文件不适用于在建筑物两层（楼层）之间运送人员的设备。 它不包括确定此类起重机和装置的老化或腐蚀的方法。 它不包括在使用前对单个单元进行鉴定的方法。 本文件的要求是根据被提升人员和使用提升机的维护人员的需要制定的。 [外文原描述]： This document specifies requirements and test methods for hoists and body-support units intended for the transfer of persons with disabilities. The document applies to the following products classified in ISO 9999:—[1]. — 12 36 03 Mobile hoists for transferring a person in sitting position with sling seats; — 12 36 04 Mobile hoists for transferring a person in standing position; — 12 36 06 Mobile hoists for transferring a person in sitting position with solid seats; — 12 36 09 Mobile hoists for transferring a person in lying position; — 12 36 12 Stationary hoists fixed to walls, floor or ceiling; — 12 36 15 Stationary hoists fixed to, or mounted in or on, another product; — 12 36 18 Stationary free-standing hoists; — 12 36 21 Body-support units for hoists. This document covers different types of mobile and stationary hoists. Some of the requirements and test methods are general and others are only valid for specific product types. Annexes A, B and C provide general recommendations. This document does not apply to devices that transport persons between two levels (floors) of a building. It does not include methods for the determination of ageing or corrosion of such hoists and units. It does not include methods to qualify individual units prior to use. The requirements of this document are formulated with regard to the needs of both the persons being hoisted and the attendant using the hoist. [1] Under preparation. Stage at the time of publication: ISO/FDIS 9999:2021.