标准摘要
[中文适用范围]： 本文件规定了固定源烟气中氮氧化物 (NOx) 的测定方法，并描述了自动测量系统的基本结构和关键性能特征。 该方法允许使用永久安装的氮氧化物排放测量系统进行连续监测。 本文件描述了与一系列分析仪相关的提取系统和原位（非提取）系统，这些分析仪使用例如以下原理进行操作： ——化学发光（CL）； ——红外吸收（NDIR）； ——傅里叶变换红外（FTIR）光谱； ——紫外线吸收（NDUV）； ——微分光学吸收光谱（DOAS）；可以使用其他等效的仪器方法，例如激光光谱技术，只要它们满足本文件中指定的最低性能要求。 可以根据本文件或类似方法使用参考材料来验证测量系统。 基于上述原理的自动测量系统 (AMS) 已成功用于本应用，其测量范围如附录 F 所示。 [外文原描述]： This document specifies a method for the determination of nitrogen oxides (NO x ) in flue gas of stationary sources and describes the fundamental structure and the key performance characteristics of automated measuring systems. The method allows continuous monitoring with permanently installed measuring systems of NO x emissions. This document describes extractive systems and in situ (non-extractive) systems in connection with a range of analysers that operate using, for example, the following principles: — chemiluminescence (CL); — infrared absorption (NDIR); — Fourier transform infrared (FTIR) spectroscopy; — ultraviolet absorption (NDUV); — differential optical absorption spectroscopy (DOAS); Other equivalent instrumental methods such as laser spectroscopic techniques can be used provided they meet the minimum performance requirements specified in this document. The measuring system can be validated with reference materials, in accordance with this document, or comparable methods. Automated measuring system (AMS) based on the principles listed above has been used successfully in this application for the measuring ranges as shown in Annex F.
英文名称Stationary source emissions — Determination of the mass concentration of nitrogen oxides in flue gas — Performance characteristics of automated measuring systems