标准摘要
[中文适用范围]： 本部分的ISO 11119规范了具有分担载荷的焊接内胆复合气瓶的要求，适用于0.5升至150升水容量，并且最大试验压力为450巴。这些气瓶用于存储和运输压缩气体或液化气体。 这些气瓶由不锈钢、碳钢或铝合金制成，外层缠绕碳纤维、芳纶纤维或玻璃纤维（或其混合物）。 这些气瓶是类型3的全缠绕气瓶，具有分担载荷的金属内胆和复合材料强化。 [外文原描述]： ISO 11119-4:2016 specifies requirements for composite gas cylinders with load-sharing welded liners between 0,5 l and 150 l water capacity and a maximum test pressure of 450 bar for the storage and conveyance of compressed or liquefied gases. NOTE 1 1 bar = 105Pa = 105N/m2. The cylinders are constructed in the form of a welded stainless steel liner or welded ferritic steel liner or welded aluminium alloy liner and overwrapped with carbon fibre or aramid fibre or glass fibre (or a mixture thereof) in a matrix to provide longitudinal and circumferential reinforcement. The cylinders in this part of ISO 11119 are type 3 fully wrapped cylinders with a load-sharing metal liner and composite reinforcement on both the cylindrical portion and the dome ends. Cylinders produced in accordance with this part of ISO 11119 have a minimum design life of 15 years. Cylinders with test pressure of up to 60 bar have an unlimited design life. ISO 11119-4:2016 does not address the design, fitting, and performance of removable protective sleeves. ISO 11119-4:2016 does not apply to cylinders with seamless liners. For seamless liners, ISO 11119‑2 applies. NOTE 2 ISO 11623 covers periodic inspection and re-testing of composite cylinders.
英文名称Gas cylinders — Refillable composite gas cylinders — Design, construction and testing — Part 4: Fully wrapped fibre reinforced composite gas cylinders up to 150 l with load-sharing welded metallic liners