手持非电动工具.安全性要求.第1部分:无螺纹机械紧固件的组装动力工具

[中文适用范围]： 本部分ISO 11148规定了用于安装、紧固或从工件一侧将破杆和非破杆铆钉、螺栓、塞子和紧固件安装到金属、塑料和其他材料中的手持式非电动动力工具（以下简称“用于非螺纹机械紧固件的装配动力工具”）的安全要求。用于非螺纹机械紧固件的装配动力工具可由压缩空气、液压油或内燃机驱动，旨在由一名操作员使用，并由操作员的手或双手支撑，可带或不带悬挂装置（例如平衡器）。 本部分ISO 1148适用于： - 破杆紧固件、铆钉或塞子工具； - 破杆锁紧螺栓工具； - 芯杆加载铆接工具； - 铆螺母安装器。 本部分ISO 1148不适用于为了将手持式动力工具安装在夹具上而进行的特殊要求和修改。 本部分ISO 1148涉及当用于非螺纹机械紧固件的装配动力工具按预期使用以及在制造商可合理预见的误用条件下使用时，所有相关的重大危险、危险情况或危险事件，但不包括在潜在爆炸性环境中的使用。 注：EN 13463-1给出了用于潜在爆炸性环境的非电气设备的要求。 [外文原描述]： ISO 11148-1:2011 specifies safety requirements for hand-held non-electric power tools (hereinafter "assembly power tools for non-threaded mechanical fasteners") intended for installation, tightening or removal of both breakstem and non-breakstem rivets, bolts, plugs and fasteners from one side of a workpiece into metals, plastics and other materials. The assembly power tools for non-threaded mechanical fasteners can be powered by compressed air, hydraulic fluid or internal combustion engines and are intended to be used by one operator and supported by the operator's hand or hands, with or without a suspension, e.g. a balancer. ISO 11148-1:2011 is applicable to breakstem fastener, rivet or plug tools, breakstem lockbolt tools, mandrel loaded riveting tools and rivet nut setters. ISO 11148-1:2011 is not applicable to special requirements and modifications of hand-held power tools for the purpose of mounting them in a fixture. ISO 11148-1:2011 deals with all significant hazards, hazardous situations or hazardous events relevant to assembly power tools for non-threaded mechanical fasteners when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer, with the exception of the use of power tools in potentially explosive atmospheres.