标准摘要
[中文适用范围]： 本文件规定了便携式内燃机手持链锯的设计、制造、运输和调试的安全要求和验证措施。 链锯仅供一名操作员用于森林作业，右手放在后手柄上，左手放在前手柄上。 本文件不包括产品的拆卸和报废。 规定了消除或减少因使用这些机器而产生的危险的方法以及制造商提供的安全工作实践信息的类型。 本文件涉及所有重大危险、危险情况和危险事件，但发动机排量超过 80 cm3 的机器的反冲和平衡除外，与这些机器按预期使用和误用条件相关的情况如下：制造商可以合理预见的（见附录 A）。 本文件适用于其发布之日后生产的链锯。 注：图 1 显示了本文件范围内的链锯示例。 钥匙 1 后护木 7 尖刺保险杠 2 后手柄 8 导杆盖 3 油门扳机 9 导杆 4 油门扳机锁定装置 10 锯链 5 前手柄 11 链条捕捉器 6 前护手 图 1 — 示例电锯 1 [外文原描述]： This document specifies safety requirements and measures for verification for the design, construction, transporting and commissioning of portable, combustion-engine, hand-held chain-saws. The chain-saws are intended to be used for forest work by only one operator, with the right hand on the rear handle and left hand on the front handle. Dismantling and scrapping of the product is not covered by this document. Methods for the elimination or reduction of hazards arising from the use of these machines and the type of information on safe working practices to be provided by the manufacturer are specified. This document deals with all significant hazards, hazardous situations and hazardous events, with the exception of kickback and balance for machines with an engine displacement of more than 80 cm 3 , relevant to these machines when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Annex A). This document is applicable to chain-saws manufactured after its date of publication.
英文名称Machinery for forestry — Portable chain-saw safety requirements and testing — Part 1: Chain-saws for forest service