标准摘要
[中文适用范围]： 本文件制定了嵌入式辐射加热和冷却系统的控制指南。 它规定了加热和冷却地板、天花板和墙壁结构的设计和施工的统一要求，以确保加热/冷却系统适合特定应用。 本文件中规定的要求仅适用于加热/冷却系统的组件以及属于加热/冷却表面一部分且因加热/冷却系统而安装的元件。 本文件适用于住宅、商业和工业建筑中的水基嵌入式表面加热和冷却系统。 这些方法适用于集成到墙壁、地板或天花板结构中且没有任何开放空气间隙的系统。 它不适用于具有未与建筑结构集成的开放气隙的面板系统。 本文件还酌情适用于使用水以外的流体作为加热或冷却介质。 本文档不适用于系统测试。 这些方法不适用于加热或冷却的天花板或横梁。 [外文原描述]： This document establishes guidelines for the control of embedded radiant heating and cooling systems. It specifies uniform requirements for the design and construction of heating and cooling floors, ceiling and wall structures to ensure that the heating/cooling systems are suited to the particular application. The requirements specified in this document are applicable only to the components of the heating/cooling systems and the elements which are part of the heating/cooling surface and which are installed due to the heating/cooling systems. This document is applicable to water-based embedded surface heating and cooling systems in residential, commercial and industrial buildings. The methods apply to systems integrated into the wall, floor or ceiling construction without any open air gaps. It is not applicable to panel systems with an open air gap which is not integrated with the building structure. This document also applies, as appropriate, to the use of fluids other than water as a heating or cooling medium. This document is not applicable for testing of systems. The methods do not apply to heated or chilled ceiling panels or beams.
英文名称Building environment design — Design, dimensioning, installation and control of embedded radiant heating and cooling systems — Part 6: Control