标准摘要
[中文适用范围]： 本文件给出了确定木材部件之间机械连接群体特征值的方法，这些特征值是根据全尺寸测试值计算得出的。 它提出了确定以下各项的方法： a) 机械连接的滑移模量； b) 承受单调或循环载荷的连接的特征强度。 胶合连接不包括在本文档的范围内。 注 1：假定样品中所有样品的失效模式相同。 注 2：当可获得少量测试结果时，采用 ISO 12122-6 来确定平均值和第 5 个百分位数。 注 3：本文件条款的信息性注释可在附件 A 中找到。 [外文原描述]： This document gives methods of determination of characteristic values for a defined population of mechanical connections between timber components, calculated from full scale test values. It presents methods for the determination of: a) slip modulus of mechanical connections; b) characteristic strength of connections subjected to either monotonic or cyclic loads. Glued connections are excluded from the scope of this document. NOTE 1 It is assumed that the failure mode is the same for all specimens in the sample. NOTE 2 When a small number of test results is available, ISO 12122‑6 is used for the determination of the mean and the 5th percentile values. NOTE 3 Informative commentary to the clauses of this document can be found in Annex A.
英文名称Timber structures — Determination of characteristic values — Part 5: Mechanical connections