标准摘要
[中文适用范围]： 本文件根据 ISO 12164-3 规定了用于机床（车床和车铣复合机）的空心锥柄 (HSK) 的带锥度和法兰接触面的接收器的尺寸。本文件规定了两种类型的接收器： - T 型用于自动换刀； - U 型仅用于手动换刀，通过接收器和刀柄上的径向孔。注 1：T 型和 U 型接收器适合 HSK 柄 T、TA 和 U（根据 ISO 12164-3）。接收器也适合根据 ISO 12164-1 的 HSK 柄 A、AB、C 和 CB。注 2：HSK 类型 A、AB、C、CB、T 和 TA 也可以手动更换。 [外文原描述]： This document specifies dimensions for receivers with taper and flange contact surfaces for hollow taper shanks (HSK) according to ISO 12164-3 to be applied to machine tools (turning and combinations of turning and milling machines). This document specifies two types of receivers: — type T for automatic tool change; — type U for manual tool change only, via radial holes in both the receiver and the tool shank. NOTE 1 The receivers of types T and U fit the HSK shanks T, TA and U (according to ISO 12164-3). The receivers also fit the HSK shanks A, AB, C and CB according to ISO 12164-1. NOTE 2 HSK types A, AB, C, CB, T and TA can also be changed manually.
英文名称Hollow taper interface with flange contact surface — Part 4: Receivers of types T and U for hollow taper shanks of types T, TA and U