标准摘要
[中文适用范围]： 本部分 ISO 12215 给出了适用于船长（LH）不超过 24 米（按 ISO 8666 测量）的小型单体船所安装的舵的剖面尺寸要求。本部分仅适用于单体船。本部分未给出关于实现适当操纵能力所需的舵特性的要求。本部分仅考虑由于船舶操纵引起的舵上的压力载荷。由搁浅或靠泊引起的舵或其龙骨（如安装）上的载荷（如相关）不在范围内，需要单独考虑。注：由此部分 ISO 12215 导出的剖面尺寸主要适用于包括租赁船在内的休闲船。 [外文原描述]： ISO 12215-8:2009 gives requirements on the scantlings of rudders fitted to small craft with a length of hull of up to 24 m, measured according to ISO 8666. It applies only to monohulls. ISO 12215-8:2009 does not give requirements on rudder characteristics required for proper steering capabilities. ISO 12215-8:2009 only considers pressure loads on the rudder due to craft manoeuvring. Loads on the rudder or its skeg, where fitted, induced by grounding or docking, where relevant, are out of scope and need to be considered separately. Scantlings derived from ISO 12215-8:2009 are primarily intended to apply to recreational craft including charter craft.
英文名称Small craft — Hull construction and scantlings — Part 8: Rudders