标准摘要
[中文适用范围]： ISO 1268 的这一部分规定了团状模塑料 (BMC) 注射成型测试样品时应遵循的一般原则，并提供了用于制备一种类型样品以建立可重复成型条件的模具设计细节。 在适当的情况下，ISO 1268 的这一部分可适用于注塑成型的片状模塑料 (SMC)。 其目的是促进描述成型工艺主要参数的一致性，并建立报告成型条件的统一做法。 可重复制备可给出可比较结果的测试样本所需的特定条件将因所使用的每种材料而异。 这些条件在相关材料的国际标准中给出，或者由有关各方商定。 注：测试表明，模具设计是可重复制备测试样本的一个重要因素。 ISO 1268 的这一部分应与 ISO 1268-1 一起阅读。 [外文原描述]： ISO 1268-10:2005 specifies the general principles to be followed while injection moulding test specimens of bulk moulding compound (BMC) and gives details of mould designs for preparing one type of specimen for use in establishing reproducible moulding conditions. Where appropriate, this part of ISO 1268 may be applied to sheet moulding compound (SMC) formulated for injection moulding. Its purpose is to promote uniformity in describing the main parameters of the moulding process and also to establish uniform practice in reporting moulding conditions. The particular conditions required for the reproducible preparation of test specimens which will give comparable results will vary for each material used. These conditions are given in the International Standard for the relevant material or are to be agreed upon between interested parties.
英文名称Fibre-reinforced plastics — Methods of producing test plates — Part 10: Injection moulding of BMC and other long-fibre moulding compounds — General principles and moulding of multipurpose test specimens