纺织品.织物拉伸特性.第1部分:使用条样法测定最大受力和最大受力时的伸长率

[中文适用范围]： ISO 13934 的这一部分规定了使用条带法测定纺织物的最大力和最大力伸长率的程序。 注 ISO 13934-2 描述了称为抓取方法的方法，有关信息参考，请参阅参考书目。 该方法主要适用于机织织物，包括通过弹性纤维的存在、机械或化学处理而表现出拉伸特性的织物。 LI也适用于其他技术生产的织物。 它通常不适用于土工织物、非织造布、涂层织物、纺织玻璃机织物以及由碳纤维或聚烯烃带纱制成的织物（参见参考文献）。 本方法规定了试验用标准大气平衡试样和湿态试样的最大力和最大力伸长率的测定。 该方法仅限于使用恒定延伸率(CRE)]测试机。 [外文原描述]： ISO 13934-1:2013 specifies a procedure to determine the maximum force and elongation at maximum force of textile fabrics using a strip method. The method is mainly applicable to woven textile fabrics, including fabrics which exhibit stretch characteristics imparted by the presence of an elastomeric fibre, mechanical, or chemical treatment. It can be applicable to fabrics produced by other techniques. It is not normally applicable to geotextiles, nonwovens, coated fabrics, textile-glass woven fabrics, and fabrics made from carbon fibres or polyolefin tape yarns (see Bibliography). The method specifies the determination of the maximum force and elongation at maximum force of test specimens in equilibrium with the standard atmosphere for testing, and of test specimens in the wet state. The method is restricted to the use of constant rate of extension (CRE) testing machines.