线切割机床(EDM丝)检验条件.精度检验

[中文适用范围]： 本国际标准参照ISO 230-1、ISO 230-2和ISO 230-4规定了通用和普通精度的几何试验、数控定位轴的精度和重复性试验、加工试验和圆弧试验电火花线切割机（电火花线切割机）。 它还规定了与上述测试相对应的适用公差。 本国际标准适用于十字滑台型机器和双柱型机器。 本国际标准仅涉及机器精度的验证。 不适用于机器运行的测试（振动、异常噪声、部件的粘滑运动等），也不适用于检查其特性（如速度、进给量等），一般应检查这些特性在测试精度之前。 本国际标准参考 ISO 841 提供了机器主要部件使用的术语和轴的名称。 [外文原描述]： ISO 14137:2015, with reference to ISO 230‑1, ISO 230‑2, and ISO 230‑4, geometric tests, tests of accuracy and repeatability of numerically controlled positioning axes, machining test and circular test for general purpose and normal-accuracy wire electro-discharge machines (wire EDM). It also specifies the applicable tolerances, corresponding to the above-mentioned tests. ISO 14137:2015 is applicable to cross-slide table type machines and double-column type machines. ISO 14137:2015 deals only with the verification of accuracy of the machine. It does not apply to the testing of the machine operation (vibrations, abnormal noises, stick-slip motion of components, etc.) nor to the checking of its characteristics (such as speeds, feeds, etc.), which should generally be checked before the testing of the accuracy. ISO 14137:2015 provides the terminology used for the principal components of the machine and the designation of the axes with reference to ISO 841.