标准摘要
[中文适用范围]： 本国际标准描述了在动电位控制下测定不锈钢（奥氏体、铁素体/奥氏体、铁素体、马氏体不锈钢）点蚀电位的程序。与其他恒电位测试方法相比，本测试方法的主要优势在于快速，只需一次电位扫描即可测量点蚀电位。本国际标准测定的点蚀电位可作为性能的相对指标。例如，可以比较不同批次不锈钢等级和产品的相对性能。本国际标准中描述的测试并非旨在确定在实际使用条件下是否会发生实际点蚀的点蚀电位。 [外文原描述]： ISO 15158:2014 describes the procedure for determining the pitting potential for stainless steels (austenitic, ferritic/austenitic, ferritic, martensitic stainless steel) under potentiodynamic control. The principal advantage compared with other potentiostatic test methods is the rapidity of this test method, with which the pitting potential can be measured in a single potential scan. The pitting potential as determined by ISO 15158:2014 can be used as a relative index of performance. For example, one can compare the relative performances for different lots of stainless-steel grades and products. The test described in ISO 15158:2014 is not intended to determine the pitting potential at which actual pitting can occur under real service conditions, or not.
英文名称Corrosion of metals and alloys — Method of measuring the pitting potential for stainless steels by potentiodynamic control in sodium chloride solution