圆柱形研磨套筒支承夹具.第1部分:手动砂轮机用带柄的支承夹具

[中文适用范围]： ISO 15637 的这一部分适用于根据 ISO 2421 与 D ≤ 100 mm 的圆柱形磨料套筒一起使用的带有柄的固定装置。 带有直径 D ≤ 100 mm 的柄的固定装置大多具有片状芯，并且用于手持式磨床。 离心力对薄片的影响导致直径增加，从而将磨料套筒夹紧到固定装置上。 [外文原描述]： ISO 15637-1:2002 applies to holding fixtures with shank for use with cylindrical abrasive sleeves with a diameter equal to or less than 100 mm in accordance with ISO 2421. Holding fixtures with shank having a diameter equal to or less than 100 mm mostly have lamellar cores and are used on hand-held grinding machines. The impact of centrifugal forces on the lamellae result in an increase in diameter and thereby clamp the abrasive sleeve on to the holding fixture.