标准摘要
[中文适用范围]： 本部分描述了使用16063模式参数的数学基础来描述参数校准数据、术语和方法。这些输入/输出不确定性的特征是通过收集与参数校准特性相关的标准进行描述。在振动和冲击激励器的校准方法中，以及与ISO 16063-11、ISO 16063-13、ISO 16063-21和ISO 16063-22结合使用时，提供的规范描述了评估使用的程序。这些不确定性的估计符合ISO/IEC指南98-3和ISO/IEC指南98-3:2008/补充1:2008中的方法。 [外文原描述]： ISO 16063-43:2015 prescribes terms and methods on the estimation of parameters used in mathematical models describing the input/output characteristics of vibration transducers, together with the respective parameter uncertainties. The described methods estimate the parameters on the basis of calibration data collected with standard calibration procedures in accordance with ISO 16063‑11, ISO 16063‑13, ISO 16063‑21 and ISO 16063‑22. The specification is provided as an extension of the existing procedures and definitions in those International Standards. The uncertainty estimation described conforms to the methods established by ISO/IEC Guide 98‑3 and ISO/IEC Guide 98‑3:2008/Supplement 1: 2008. The new characterization described in this document is intended to improve the quality of calibrations and measurement applications with broadband/transient input, like shock. It provides the means of a characterization of the vibration transducer's response to a transient input and, therefore, provides a basis for the accurate measurement of transient vibrational signals with the prediction of an input from an acquired output signal. The calibration data for accelerometers used in the aforementioned field of applications should additionally be evaluated and documented in accordance with the methods described below, in order to provide measurement capabilities and uncertainties beyond the limits drawn by the single value characterization given by ISO 16063‑13 and ISO 16063‑22.
英文名称Methods for the calibration of vibration and shock transducers — Part 43: Calibration of accelerometers by model-based parameter identification