标准摘要
[中文适用范围]： 本文件规定了在规定和简化的实验室条件下进行的油/水分离器比较测试。 该测试适用于压力侧油/水分离器以及吸入侧油/水分离器。 使用相同的测试装置布局，压力侧油/水分离器使用细液滴进行测试，吸入侧过滤器使用粗液滴进行测试。 额定流量（以升/小时为单位）适用于 50 l/h 至 1500 l/h 之间的范围。 根据客户和油/水分离器制造商之间的协议，并进行一些修改，该程序可用于具有更高或更低流量的油/水分离器。 [外文原描述]： ISO 16332:2018 specifies a fuel/water separator comparison test under defined and simplified laboratory conditions. This test is intended for pressure side fuel/water separators as well as for suction side fuel/water separators. Pressure side fuel/water separators are tested with fine droplets and suction side filters are tested with coarse droplets using the same test rig layout. The rated flow (in litres per hour) is intended for the range between 50 l/h and 1 500 l/h. By agreement between customer and fuel/water separator manufacturer, and with some modifications, the procedures can be used for fuel/water separators with higher or lower flow rates.
英文名称Diesel engines — Fuel filters — Method for evaluating fuel/water separation efficiency