木基板材.干燥处理的纤维板

[中文适用范围]： 本国际标准 specifies a classification matrix, related mandatory tests and thickness ranges for ultra-low-, low-, medium- and high-density dry process fibreboard. It then provides the manufacturing property requirements for wood-based fibreboard. It applies to these types of uncoated fibreboard. The values listed in this International Standard relate to product properties used to classify fibreboards into one of four types (UDF, LDF, MDF and HDF, see use in one of four Clause 3), one of four grades (GP, FN, BL and LB), service conditions (REG, MR1, MR2, and HM R). The values are not characteristic values to be used for design purposes. [外文原描述]： ISO 16895:2016 specifies a classification matrix, related mandatory tests and thickness ranges for ultra-low-, low-, medium- and high-density dry process wood-based fibreboard. It then provides the manufacturing property requirements for these types of uncoated fibreboard. The values listed in this International Standard relate to product properties used to classify fibreboards into one of four types (UDF, LDF, MDF and HDF, see Clause 3), one of four grades (GP, FN, BL and LB), for use in one of four service conditions (REG, MR1, MR2, and HMR). The values are not characteristic values to be used for design purposes. NOTE Fibreboards are broadly divided into two groups based on the manufacturing process, namely the dry process group and the wet process group (see Clause 3). Wet process fibreboards lie outside the scope of this International Standard.