热轧不锈钢板.尺寸规格和形状公差

[中文适用范围]： 本国际标准规定了在可逆式轧机上生产的热轧不锈钢板（四开板）的公差要求，该热轧不锈钢板具有以下特点：a) 公称厚度 t，4 mm≤t≤250 mm；b) 公称宽度 w，w≥600 mm。对于从较宽的板材上切割或纵剪而成的宽度 w＜600 mm 的板材的公差，应由制造商和购买者在询价和订货时商定。本国际标准不适用于圆板、定制板、花纹板或地板用球形板或宽扁钢，也不适用于连续加工板材（卷取板材）。本国际标准不包括圆板、定制板、花纹板或地板用球形板或宽扁钢。它不包括连续加工板材（卷取板材），因为这些板材的公差已在另一国际标准中定义（见 ISO 9444）。 [外文原描述]： ISO 18286:2008 specifies requirements for tolerances for hot-rolled stainless steel plates (quarto plates) made on a reversing mill with the following characteristics: nominal thickness, t , from 4 mm to 250 mm; and nominal width, w , equal to or greater than 600 mm. Tolerances for plate of width w less than 600 mm cut or slit from wider plate should be agreed upon between manufacturer and purchaser at the time of enquiry and order. ISO 18286:2008 is not applicable to round plates, custom-made plates, checker plate or bulb plate for flooring or wide flats, nor to continuous-process plates (plate made with coiling).