标准摘要
[中文适用范围]： This文件规定了连续生产用的组合木工机械（见3.1）的安全要求和措施，这些机械具备手工装卸工件的能力，并且在此后也称为“机械”。这些机器设计用于切割实心木材以及具有类似物理特性的材料（参见ISO 19085-1:2021, 3.2）。本文件处理了所有在预期操作、调整和维护条件下，以及制造商预见到的条件下与机器相关的重大危险、危险情况和事件，见附录A。合理可预见的误用也被考虑进去。运输、组装、拆卸、禁用和报废阶段也已考虑到。本文件适用于配备ISO 19085-5:2024, ISO 19085-6:2024, ISO 19085-7:2024 和 ISO 19085-9:2024 规定的装置或附加工作单元的机械。本文件不适用于：a) 只包含刨削单元和凿榫机的机械；注意，只包含刨削单元和凿榫机的机械在ISO 19085-7:2024中有所规定。b) 包含带锯单元的组合机械；c) 带有独立驱动（除刨削单元驱动外）的凿榫单元的机械；d) 意图用于潜在爆炸性气氛中的机械；e) 本文件发布前制造的机械。 [外文原描述]： This document specifies the safety requirements and measures for combined woodworking machines (defined in 3.1), capable of continuous production use, with manual loading and unloading of the workpiece and hereinafter referred to also as “machines”. The machines are designed to cut solid wood and material with similar physical characteristics to wood (see ISO 19085-1:2021, 3.2). This document deals with all significant hazards, hazardous situations and events, listed in Annex A, relevant to the machines, when operated, adjusted and maintained as intended and under the conditions foreseen by the manufacturer; reasonably foreseeable misuse has been considered too. Transport, assembly, dismantling, disabling and scrapping phases have also been taken into account. This document applies to machines also equipped with the devices or additional working units listed in the Scopes of ISO 19085-5:2024, ISO 19085-6:2024, ISO 19085-7:2024 and ISO 19085-9:2024. This document does not apply to: a) machines incorporating a planing unit and a mortising device only; NOTE Machines incorporating a planing unit and a mortising device only are dealt with in ISO 19085-7:2024. b) combined machines incorporating a band saw unit; c) machines with a mortising unit with a separate drive other than the planing unit drive; d) machines intended for use in potentially explosive atmosphere; e) machines manufactured before the publication of this document.
英文名称Woodworking machines — Safety — Part 11: Combined machines