标准摘要
[中文适用范围]： 本文件规定了连续生产使用的木材锯片机（见3.1）的安全要求和措施，此类机器也称为“机器”。这些机器设计用于切割实心木料和其他具有类似物理特性的材料。本文件处理了操作、调整和维护时附件A中列出的所有重大危险、危险情况和事件；同时考虑了可合理预见的误用。还考虑到了运输、组装、拆卸、停用和报废阶段的安全问题。此外，本文件也适用于配备了以下装置/附加工作单元之一或多个的机器，这些装置/工作单元的危险已经得到处理：a) 起升和下降主锯片及分料锯片的装置；b) 主锯片及分料锯片倾斜装置，用于单向或多方向斜切；c) 划线装置；d) 宽度不超过20毫米的铣刀进行槽加工的装置；e) 可拆卸的动力送料单元；f) 动力驱动滑动工作台；g) 工件夹紧。本文件不适用于预期用于爆炸性环境中的机器，也不适用于在其发布日期之前制造的机器。 [外文原描述]： This document specifies the safety requirements and measures for dimension saws (defined in 3.1), capable of continuous production use and hereinafter referred to also as “machines”. The machines are designed to cut solid wood and material with similar physical characteristics to wood. This document deals with all significant hazards, hazardous situations and events, listed in Annex A, relevant to the machines, when operated, adjusted and maintained as intended and under the conditions foreseen by the manufacturer; reasonably foreseeable misuse has been considered too. Transport, assembly, dismantling, disabling and scrapping phases have also been taken into account. This document is also applicable to machines fitted with one or more of the following devices/additional working units, whose hazards have been dealt with: a) device to raise and lower the main saw blade and scoring saw blade; b) device to tilt the main saw blade and scoring saw blade for angled cutting in one or both directions; c) device for scoring; d) device for grooving with milling tool with a width not exceeding 20 mm; e) demountable power feed unit; f) power-operated sliding table; g) workpiece clamping. This document is not applicable to machines intended for use in potentially explosive atmospheres or to machines manufactured prior to the date of its publication.
英文名称Woodworking machines — Safety — Part 5: Dimension saws