标准摘要
[中文适用范围]： 本文件规定了用于评估主动安全系统的系统检测和性能的替代目标的性能要求。 本文件规定了全向多用途车辆目标的属性，用于评估各种交通场景中的交互。 本文件规定了车辆目标的属性，使其能够在尺寸、形状、反射属性等方面代表乘用车，以用于测试目的。 本文件根据本文件发布时常用的传感技术解决了车辆目标的检测要求，并在可能的情况下预测了未来的传感技术。 它还提出了验证这些传感器的目标响应属性的方法，以及目标载体的性能要求。 本文件中规定的车辆目标反映的是乘用车，特别是较小且较常见的 B 级和 C 级汽车。 本文件不涉及速度、位置或事件时间方面的测试程序。 主动安全系统的性能标准也没有得到解决。 [外文原描述]： This document specifies performance requirements for surrogate targets used to assess the system detection and performance of active safety systems. This document specifies the properties of an omni-directional multi-purpose vehicle target for assessment of interaction in a variety of traffic scenarios. This document specifies the properties of a vehicle target that will allow it to represent a passenger vehicle in terms of size, shape, reflection properties, etc. for testing purposes. This document addresses the detection requirements for a vehicle target in terms of sensing technologies commonly in use at the time of publication of this document, and where possible, anticipates future sensing technologies. It also addresses methodologies to verify the target response properties to these sensors, as well as performance requirements for the target carrier. The vehicle targets specified in this document reflect passenger cars and, in particular, the smaller and more common B and C segment cars. This document does not address the test procedures in terms of speeds, positions, or timing of events. Performance criteria for the active safety system are also not addressed.
英文名称Road vehicles — Test devices for target vehicles, vulnerable road users and other objects, for assessment of active safety functions — Part 3: Requirements for passenger vehicle 3D targets