标准摘要
[中文适用范围]： 本标准规定了钢铁上镉附加处理电镀层的要求。 它包括买方向电镀商提供的信息，并描述了涂层要求，包括电镀前后热处理的要求。 它不适用于涂敷在非加工形式的片材、带材或线材上的涂层，涂在紧密螺旋弹簧上的涂层，或用于保护性、固有润滑性、延展性、导电性和低接触电阻用途之外的用途的涂层。 本文件没有规定镉电沉积前基体金属表面状况的要求。 可应用于螺纹部件的涂层厚度可能受到尺寸要求（包括等级或配合）的限制。 有关耐腐蚀性、冲洗和干燥、批量加工零件以及铬酸盐转化涂层染色的附加信息，请参见附录 C。 [外文原描述]： ISO 2082:2017 specifies the requirements of electroplated coatings of cadmium with supplementary treatments on iron and steel. It includes information that is to be supplied by the purchaser to the electroplater, and describes coating requirements, including those for heat treatment before and after electroplating. It is not applicable to coatings applied - to sheet, strip or wire in the non-fabricated form, - to close-coiled springs, or - for purposes other than protective, intrinsic lubricity, ductility, electrical conductivity and low contact resistance use. ISO 2082:2017 does not specify requirements for the surface condition of the basis metal prior to electrodeposition with cadmium. The coating thickness that can be applied to threaded components can be limited by dimensional requirements, including class or fit. Additional information on corrosion resistance, rinsing and drying, processing parts in bulk and dyeing of chromate conversion coatings is given in Annex C.
英文名称Metallic and other inorganic coatings — Electroplated coatings of cadmium with supplementary treatments on iron or steel