无人机系统.第2部分:无人机部件

[中文适用范围]： 本文件规定了确保无人机系统（UAS）设计和制造质量和安全的要求，其中包括无人机（UA）、远程驾驶站（RPS）、数据链、有效载荷和相关支持设备。 本文件包括有关无人机、任何相关远程驾驶站 (RPS)、命令和控制链路（C2 链路）、任何其他所需数据链路（例如有效负载、交通管理信息、车辆识别）以及任何其他信息的信息。 系统元素可能需要。 本文件不涵盖载客无人机或无人机组件设计和制造的技术要求。 本文档不包括与 UA 流量管理系统合规性所特有的设备注意事项。 该文件适用于无人机的合理预期使用。 本文件适用于： a) 设计用于国家航空当局确定不需要适航证书（C of A）的无人机系统； b) 当需要 C of A 时，补充航空当局为建立审定基础而发布的技术标准； c) 作为航空当局可接受的替代合规方式。 [外文原描述]： This document specifies requirements for ensuring the quality and safety of the design and manufacture of unmanned aircraft systems (UAS) that include unmanned aircraft (UA), remote pilot stations (RPS), datalinks, payloads, and associated support equipment. This document includes information regarding the unmanned aircraft, any associated remote pilot station (RPS)(s), the command and control links (C2 Link), any other required data links (e.g. payload, traffic management information, vehicle identification) and any other system elements as can be required. This document does not cover passenger carrying UAS or technical requirements for the design and manufacturing for UAS components. This document does not include equipment considerations unique to compliance with UA traffic management systems. The document is applicable to the reasonable expected use of a UAS. This document is applicable: a) to UAS designed for use where a State aviation authority has determined a Certificate of Airworthiness (C of A) is not required; b) where a C of A is required, to complement technical standards published by the aviation authority for the purposes of building the certification basis; or c) as an alternative means of compliance if acceptable to the aviation authority.