标准摘要
[中文适用范围]： 本文件规定了测重测试的设备、执行和报告要求。 注：本文件满足根据 EN 1997-1 和 EN 1997-2 作为岩土勘察和测试一部分的重量测深测试的要求。 本文件规定了在天然土壤、人工地面和陆地或水上填充物中使用重量探测装置进行测试的程序。 本文件适用于土壤对静载荷或静载荷的抵抗力和测深点规定转角的测定。 本文件提供了使用重量测深测试来提供连续土壤剖面和层顺序指示的指南。 该用途包括估计无粘性土壤的密度以及指示端承桩长度的非常致密地层的深度。 [外文原描述]： ISO 22476-10 specifies the equipment, execution and reporting requirements of the weight sounding test. NOTE ISO 22476-10 fulfils the requirements for the weight sounding test as part of the geotechnical investigation and testing according to EN 1997?1 and EN 1997?2. ISO 22476-10 specifies the procedure for conducting a test with the weight sounding device in natural soils, made ground, and fill either on land or on water. ISO 22476-10 is applicable to the determination of the resistance of soil to the static load or the static load and the specified turning of the sounding point. ISO 22476-10 gives guidelines for the use of the weight sounding test to give a continuous soil profile and an indication of the layer sequence. The use includes the estimation of the density of cohesionless soils and the depth to very dense ground layers indicating the length of end-bearing piles.
英文名称Geotechnical investigation and testing — Field testing — Part 10: Weight sounding test