航天数据和信息传送系统.通信操作规程-1

[中文适用范围]： 本国际标准规定了通信操作程序-1（COP-1）。 该程序与遥控（TC）空间数据链路协议（如 ISO 22664:2013 中定义）一起使用，以便能够将服务数据单元正确且无遗漏或重复地传送到上层的接收端，并且在与发送端上层接收到的顺序相同。 [外文原描述]： ISO 22667:2013 specifies the communications operation procedure-1 (COP-1). This procedure is used with the telecommand (TC) space data link protocol (as defined in ISO 22664:2013) to enable the delivery of service data units to the receiving end of the layer above, correct and without omission or duplication, and in the same sequential order in which they were received from the layer above at the sending end. ISO 22667:2013 defines the COP-1 in terms of the interfaces with the other procedures, the internal variables used by the protocol entity, the actions performed by the protocol entity, and the state transitions of the protocol entity. It does not specify individual implementations or products, the implementation of service interfaces within real systems, the methods or technologies required to perform the procedures, or the management activities required to configure and control the protocol.