标准摘要
[中文适用范围]： 本国际标准规定了使用驱动的垂直磨盘测定橡胶耐磨性的方法。 磨损质量损失是通过设置不同的滑移角和旋转速度在轮形橡胶试件和研磨盘之间引起的滑移来确定的，这两个轮形橡胶试件和研磨盘在彼此成直角的平面内旋转并用力压在彼此上。 指定负载。 测试结果可以报告为每单位跑步距离的质量损失和/或与参考化合物相比的耐磨指数。 本标准适用于比较测试、质量控制、规范符合性测试、裁判测试和研发工作。 由于所述的测试装置能够独立设定各个磨损参数，例如滑移角、磨盘转速和负载，因此该方法适合对各种橡胶制品，特别是轮胎进行广泛的磨损测试。 [外文原描述]： ISO 23233:2016 a method for the determination of the resistance of rubber to abrasion using a driven, vertical abrasive disc. The loss in mass on abrasion is determined through the slip caused by setting different slip angles and rotational speeds between a wheel-shaped rubber test piece and an abrasive disc which are rotating in planes at right angles to each other and pressed against each other with a specified load. The test result can be reported as the loss in mass per unit running distance and/or as an abrasion resistance index compared to a reference compound. ISO 23233:2016 is applicable to comparative testing, quality control, specification compliance testing, referee testing and research and development work. As the test device described is capable of setting each abrasion parameter, such as slip angle, rotational speed of the abrasive disc and load, independently, the method is suitable for carrying out a wide range of abrasion tests for various rubber products, especially tyres.
英文名称Rubber, vulcanized or thermoplastic — Determination of resistance to abrasion using a driven, vertical abrasive disc